Tuesday, October 20, 2015

Stewart Island Rakiura Community Conservation Art. SIRCCA

In mid September Jenny Rock and I went to Stewart Island to facilitate a printmaking workshop and exhibition along with assistants Elsie Percival, Ellen Sima and Lydia McLean. We advertised a ‘Printmaking Workshop with an Island Conservation Twist’ in the Stewart Island News, outlining the workshop goals and theme.  Basically, a weekend ‘drop – in’ printmaking workshop, which was offered to locals and visitors, that was to be subsequently exhibited in the Community Hall the following weekend. Attendance was free and people could elect how they stayed and participated. Inclusion was a goal but our team did experience a bit of teeth gnashing. Would anyone come along? Or would we get too many people and not have enough materials? How long would people stay?  This unorthodox approach was a deliberate trial to begin exploring how printmaking could create a platform to encourage community issues to be expressed in new ways.
A ‘drop-in-do -a-print’ scenario may not sound unorthodox but our workshop had a specific conservation and biodiversity focus linked with a major local (and national) controversy about methods of predator-control.  The art work being produced needed to link with content and concept, not just look ‘good’. We resourced some relevant, specific imagery by a variety of means including photographing moths, bones, native birds and eggs from the collection at the Otago Museum, downloading PDF's with images of animal tracks recorded on tunnel papers, gathering poison information sheets (eg. Brodifacoum), looking at SIRCET's website and did a lot of internet searching in general.

Source photograph          -          manipulated into black and white           -          inverted to create a negative
 Some of this imagery went on a resource table for inspiration and reference and some was translated into digital negatives suitable for make relief solar printmaking plates. High contrast black and white is needed to produce a relief plate and so I manipulated images in Photoshop as much as I could before printing them out. A challenge was that a lot of the available imagery was in a low resolution, so  while this is ok for online viewing the definition may be lost and edges are pixelated or jagged. With the example above of the Chewed Pate I had to draw into the printed out negative with black pen before printing the negative onto transparency at Uni Print.  (The toner needs to be dense enough to block the light and so it is best to use a quality commercial printer.)


Some pre-prepared solar plates.
Esther, a visitor to Stewart Island choosing which plates to print
 Participants began by printing mono prints to get the feel of the rollers, ink and press and to create  backgrounds suggestive of sea, sky and landscapes. We set up a Gelatine printing table as an alternative medium and as a space for people to try organic printmaking.  Gelli print is quick and  capable of producing abstract backgrounds and detailed surface prints directly from flat materials.

Jenny assisting with Gelatine Printing

Participants added to their backgrounds, building up narratives by relief and intaglio printing multiples. Some made their own solar plates and others carved woodblock  plates. 

Iris with a mono printed background. 
Ellen preparing a relief plate.  
I am always going to be biased about printmaking, always top of the list for me partially because printmaking exists in a community. Print shops grew out of a need to share equipment and technical knowledge as well as to have a creative environment to work in, where work can be discussed and ideas can be exchanged. However, we asked ourselves if print was the best medium. Setting up a print workshop takes a lot of time, money and equipment. Hence it is largely not taught in our school systems but perhaps this is an advantage, most people came to the workshop with little or no experience which is nicely democratic. 

A snippet from the two day printmaking frenzy
Our team went in with the teaching philosophy that there were multiple right ways of making the prints, no wrong answers. Brief instructions were given on rolling the ink and intaglio wiping but I witnessed that a lack of burgeoning rules and printmaking knowledge encouraged diverse creativity and experimentation and production was very high.
Molly is a natural printmaker 
Making or selecting your own printing plates followed by printing images and words becomes an act of self- publishing which strongly enables people articulating their own opinion. The ‘multiple right ways, no wrong answers’ philosophy flowed into the conceptual responses of the participants and resulted in some works being ambiguous or titled as questions.
Elsie assisting Di print directly from a salmon farm net
Removing the inked up net
We primarily printed edge to edge, bleed prints on small pieces of paper. Therefore multiples could be made and if something did not ‘work’ or ‘fit’ it was only a small loss. People were extremely productive - Stewart Islanders have stamina and their bond with their natural environment is very evident .
At the press bed with Gill working on the Gelatine Print table in the background
Starting to realise how big a task mounting all the works would be!
Over the week I worked as an artistic editor, collating together people’s small individual prints onto larger pieces of paper to create a final artwork. People had varying degrees of input to the arrangement of their collated print and in most cases I added block of plain colour (a rest spot for the eye) something that we did not have time to print on the workshop. A small selection of some of the artworks.....
Sandra

Letitia

Lydia

Lydia McLean and Tom Csima (who came down at the end of the week) curated the ‘locals’ exhibition on the basis of colour and the grid like layout echoed the tile composition of the prints themselves. The exhibition had a huge number of enthusiastic attendees, many of whom came back multiple times, people wanted to see what each other had made and thought (Participants wrote an artist statement which accompanied their work). It was in this exhibition space that the platform for discussion really happened and workshop participants also commented that they felt a heightened awareness of ecological issues since the printmaking.



Megan

 What is next? The SIRCCA prints will go north to Beyond Orokonui and be represented in a series of exhibitions in conjunction with The Sandpit, after which work will be returned to the makers. There were many useful outcomes from this trial which will be utilised in future workshop/exhibition combos. Ideally a longer residential workshop would be ideal. There is lots to think about, such as of making some information and technical videos.

Nic

Pip

In future maybe participants could make two similar prints – one to keep and one to exhibit or possibly there could be an exchange with another community. For this workshop we did not want the restriction of editioning but if there was longer workshop participants could trial some prints and then produce a small edition or series.

Di
Working in the eco art realm means attention must be paid to materials. We worked with solar plates, gelatine printing and oil instead of solvents. We asked participants to bring ferns, feathers and leaves which printed effectively.  Two participants, Nic and Di, came to look at the workshop then walked along the beach and collected rubbish. They subsequently printed their finds and made us all swoon in admiration. Next time we could include more collecting of samples and materials from the local area and items could also go to create a specific children’s printmaking table with stamps made from corks and bottle caps etc. More focus needs to go onto nontoxic printing inks. There are Akua soy based inks but these not quite stiff enough for holding clarity in relief plates. I read someone was printing with soil, this makes me wonder what else we could be printing with.
Sue
 Our team of artists and scientists worked quickly to absorb as much as we could about each other’s fields while making some lovely relationships with members of the Rakiura/ Stewart Island community. (We even fitted in some recreation - thanks to Megan for swift tours of the Island and Ulva for a tour of Ulva Island. There was also the Boot Camp experience.) We all want to return! I loved that printmaking and art felt so purposeful.  This venture had the support of many people and companies but I would like to give special mention to SIRCET, the Stewart Island Rakiura Community & Environment Trust, for their contribution.  SIRCET's mission is to "pursue projects that will enhance both our community and environment". sircet.org.nz/

Shona
Elsie Percival,one of the workshop facilitators is also a Science Communication Master’s candidate from Otago University. Elsie presented her own project ‘Our Island- Conservation on Rakiura’ on Stewart Island in a parallel exhibition at the Community Hall the same weekend. Her Rakiura/Stewart Island specific art work and photographs were displayed alongside plants from the Community Native Plant Nursery (SIRCET) and trapping equipment from DOC. The photo below shows some of the portable exhibition kit, named The Sandpit, that the variety of her work was curated within. Elsie’s thesis and other in-depth writing on the ‘Our Island’ project is planned so I will link that to here when she publishes her blog.
SIRCCA & Our Island. Photo credit to Elsie Percival.

Monday, August 24, 2015

Art and Light

Celebrating the UNESCO International Year of Light, the Art and Light Exhibition is a collaboration between the Dunedin School of Art and the University of Otago Departments of Physics, Botany, Anatomy, Physiology and Computer Science, hosted by the Otago Museum.


13 artists created visual responses to scientific research in collaboration with 13 scientists.  I was paired with my daughter Petra Fersterer and got some insight into her research on Trapping Ultra Cold Atoms in Optical Lattices. It was complicated, however I found my first link by mimicking her process of writing up notes on a whiteboard - I chose to cover up a large wall with a blackboard.


Paper blackboard made as a way to process information.
Detail from the blackboard showing the aspects of the
science which interested me the most
 Petra's work is purely theoretical so I made some of her notes and diagrams into solar plates and printed them. This seemed like a relevant process, being that solar plate is processed with light and I felt like I was 'trapping' the imagery.

Petra's notes overlaid with a squiggle filter to
echo a Feynman diagram 
Initial printed proofs including the 'fringe' -excess information

Masters student Kris Roberts is undertaking experimental research similar to Petra's. He works in the Neils Kjaegaards Lab and Petra's research is the maths behind what happens in the Lab. I was struggling to visualise what to make until Kris gave me a tour of the Lab. After this I went home and pulled some old camera's apart and the idea of making lenses full of information started evolving.



Neils Kjaegaards Lab, Otago University
 I was particularly fascinated with the notion that atoms change when you observe them and so I started distressing small round mirrors. I had varying degrees of success (i.e. lots of shattered glass) with printing and etching directly onto the glass however I did achieve surfaces that change when you look at them. Thanks to my friend Julie Whitefield who taught me the glass etching and made the stencils.


Pendant/Lens trials. 30mm
etching mirror glass













A challenge of the project for me was using imagery that was theoretical and not something I was initially aesthetically attracted to.  After some time I found my voice and added in things that were optical grids to me, such as a crochet doily pattern. I had a frenzy of over printing and layering some prints towards a point of visual confusion to communicate my difficulty in learning about the quantum world. Discs were then cut from the 
prints and embedded in a bezel with a mirror and a layer of clear resin.


layered prints

Sample of prints before being overlaid with a mirror and resin

detail of pendants - 120 made in total
Petra found the project valuable in having to explain her research to a different audience so they could understand it as she is used to communicating with people having a similar or higher level of physics training as she does.


Installation
Child and pendant installation. Thanks to Craig Scott from
 Otago Museum who added a large mirror backdrop.


 The pendants are available for purchase as I like the idea that people wear the pendants, the art is then mobile, a bit like the probability of places where an atom could be – it is in all places, it is here, it is there.   

 Atoms are coherent, here too they shine a bit
 of reflected light on each other.  


Monday, April 20, 2015

Some images from the Mixed Media and Printmaking Class at Wanaka Autumn Art School

piercing paper to add a tactile layer
Roz embellishing her book covers
reclaimed book page - gesso + rust
mini art journals made with reclaimed pages/paper
Bec's collagraph - printing embroidery
Barbara's solar prints ready to be cropped and collated into a picture.
 Imagery from her photos of a previous work place in Australia. 
Claire's solar print coming off the press.
(Paper was trimmed after printing or printed as a bleed print
 so we did not have to be concerned with registration.) 
Elizabeth's solar print from one of her sketches
Multiple images exposed on one plate
A selection of gelli prints, cyanotype and solar prints
A selection of print work by Patricia -
real peacock feathers and bits of wool were exposed directly onto solar plate
Needless to say the week flew by and I was sad when it was over. Hopefully there will be the opportunity to teach at the Wanaka Art School again!



Tuesday, February 3, 2015

DUNEDIN PRINTING FOR BEGINNERS WORKSHOP!

From the Open Arts Newsletter - Open Arts members have  first option but I am happy to take a waiting list in case all places are not subscribed.

Saturday 27th – Sunday 28th March
This is to be held during the first weekend of Almost an Island. In the Mac Bay Hall supper room. 
Tutored by Lynn Taylor - a foremost print maker and teacher.
The workshop is a one day course – and there are two of them – the Saturday and Sunday – there are six places available each day – the cost around $90.00.
The course starts at 9:00 am and finishes at 5:00pm.
This is a great opportunity to learn the skill of print making.
For further information and to register please contact Lynn directly!
Email – 4rooster@clear.net.nz or phone her on 4780983.
There has already been considerable interest in this workshop so don't hesitate, it will be well worth while!

Thursday, January 22, 2015

Reclaiming Book Pages

I got inspired by a pin by Janina on Pinterest which links to her blog -http://janinascasa.blogspot.co.nz/2011/12/guest-list.html.  Yes!  Altering the pages of old National Geographics. 

 Scoring magazines was the easy part - plenty in N.Z op shops. However I could not find a stockist for  Citrasolve. I tried Desolve it, also a citrus based cleaner, but it was not strong enough. I could not stop there so Googled and found another citrus based product d-Limonene.
selection of altered pages


 Sometimes small 
areas of text show through.

Ordered it, tried it - found it really hard to wait the 30 minutes for the reaction to process and I could not find a sponge brush. Some success though - but on my trial ones I  found the intensity of the marbling and colour a bit full on for my intent. Instead I came up with this method which appeals to me greatly - the pages create beautiful backgrounds which will work well interleaved into pages of a tactile sketchbook.It was an enjoyable process to do - creating a process sense of under erasure/ the palimpsest